The H-Series can take advantage of a home automation system (not included).
Please note, the Home Automation system will only allow the user to turn the fireplace off and on with no flame adjustment.
The following adjustments must be made:
You will need to remove the Jumper wire (A) from the Green Jumper Block (B) located on the left side of the Control Module.
Replace this wire with a millivolt-rated, dry contact closure (DCC) provided by you.
The remote control must then be disconnected from the system by pressing the SW button (see below) TWICE in quick succession.
The Home Automation System is now in control of the ON/OFF feature of the fireplace.