This is a guide to help clean the Gas Stones vented Pilot
1: Vacuum the pilot area with a small shop vac. The pilot area should be free of any debris.
2: Use canned air to blow air inlet hold on pilot head (red arrow in Fig 1)
3: Clean any debris off of primary Thermocouple (blue arrow in Fig 1)
(Note: you can use mild abrasive sand paper (120 grit or finer) Do not over sand.
This completes this procedure.
For any further assistance, please contact European Service Dept. at 781-324-8383. You can also email us at service@europeanhome.com.