This is a how to on accessing the heater fan and heater element for an alignment, removal or replacement.
Step 1:
The heater Fan resides in the front of the fireplace at the top center. (pictured below with blue arrow)
Step 2:
Remove the 4- 6screws (depending on the fireplace you have, on the Heater panel (pictured below)
Step 3;
The fan is attached to the bracket by 4 screws (pictured below) It is dependent on the work you are doing if you need to remove these or not. For example, if you are resetting the fan, you should not need to remove these, but replacement of the fan does require the screws be removed.
Step 4:
You now have access to the heater fan and heater element for any work needed.
Step 5:
Reverse steps to re-install everything.
If you have any questions or need phone support, please contact us at 781-324-8383.