Sync your H Series remote and receiver with the steps below:
1. Press the Red SW1 Button (pictured below) on the IFC Module. You will hear 3 fast beeps indicating the IFC board is ready to learn the remote code
2. Did you hear the beep?
Yes: Proceed to step 3
No: Verify the fireplace has power. Attempt step 1. If no sound, replace the IFC board
3. Quickly Press the ON/OFF power button on the remote control. You should now hear 4 beeps indication the receiver has learned the remotes unique code.
4. Did you hear the beeps?
Yes: Remote has learned the receiver and should operate the fireplace
No: Make sure the remote has batteries.
5. Please contact European Home Technical Support at 781-324-8383 Option 3 or e-mail service@europeanhome.com for further assistance.